Accelerated NCDA Boot Camp Data ONTAP 7-Mode (ANCDABC87)

Программа курса

Detailed Course Outline

Module 1 NCDA Overview

  • Explain the NCDA certification
  • Review key concepts from the Data ONTAP® 8.0 7-Mode Administration course

Module 2 NFS Overview

  • Define Network File System (NFS)
  • Differentiate between NFS protocol version
  • Recognize the difference between stateless and stateful protocols
  • Describe how the storage system acts as an NFS file server
  • List the requirements of NFS

Module 3 NFS Setup

  • Configure Network File System (NFS) on a NetApp® storage system
  • Add Network Information Server (NIS) to manage users, groups, and name-to-IP resolution
  • Administer a storage system to perform Domain Name System (DNS) lookups
  • Configure a storage system to access a Lightweight Directory Access Protocol (LDAP) server to centrally manage users and groups
  • Set up PC-NFS and WebNFS environments to extend the reach of NFS

Module 4 Exports and Mounts

  • Identify exportable resources
  • Export and unexport resources to clients, subnets, and netgroups
  • Administer storage system with the exportfs command
  • Create mountpoints and mount exported resources on a client
  • Monitor the usage of exported resources

Module 5 CIFS Overview

  • Describe basic CIFS features
  • Describe the following network environments:
    • Microsoft® Windows® workgroup
    • Non-Windows workgroup
    • Windows domains
  • Describe how a storage system authenticates users in each server environment
  • Explain the advantages and disadvantages of each server environment

Module 6 CIFS Workgroups

  • License CIFS on a storage system
  • Join a storage system to a Windows® workgroup environment using the cifs setup command
  • Observe the results of cifs setup
  • Manage newly created configuration files for the CIFS workgroup environment

Module 7 CIFS Shares and Sessions

  • Display all shares available on the storage system
  • List the default shares
  • Configure a client machine to access any share
  • Identify the CIFS sessions established by accessing a share on the storage system
  • Add, modify, and delete shares

Module 8 CIFS Access Control

  • Create and manage local users for a storage system
  • Identify how to create a local group and make a local user a member of that group
  • Use the command-line interface, NetApp® System Manager or Microsoft® tools to add, delete, and modify access permissions of shares
  • Use Microsoft tools to add, delete, and modify access permissions of files and folders

Module 9 CIFS Domains

  • Terminate the CIFS service to prepare for CIFS domain configuration
  • Reconfigure the CIFS service for a Windows® domain Identify the resulting files
  • Create domain users and add the domain users to a local storage system group
  • Set up Preferred Domain Controllers (DCs)

Module 10 NAS Multiprotocol

  • Determine and verify user mappings for CIFS users accessing UNIX® and MIXED volumes and qtrees
  • Determine and verify user mappings for UNIX users accessing NTFS and MIXED volumes and qtrees

Module 11 NAS Troubleshooting

  • Locate options and configuration files that can be misconfigured on the storage system
  • Test for Domain Name System (DNS) resolution on both the storage system and the client
  • Use client-side tools to test the client configuration
  • Use storage system and client tools to isolate network system blockages
  • Recognize typical error messages and list commands to identify the source of the error messages

Module 12 SAN Overview

  • Describe the differences between network-attached storage (NAS) and storage area network (SAN)
  • List the methods to implement a SAN environment
  • Define logical unit number, initiator, and target
  • Describe ports, worldwide node names, and worldwide port names
  • List the basic steps to implement a SAN

Module 13 FC Connectivity

  • Describe multiple path implementation with Fibre Channel (FC) connectivity
  • Describe how to configure FC ports on Windows®, for Red Hat®, and NetApp® systems
  • Describe commands and utilities to identify the worldwide node name (WWNN) and worldwide port name (WWPN) on Windows, Red Hat, and NetApp systems

Module 14 iSCSI Connectivity

  • Describe multiple path implementation with iSCSI connectivity
  • Configure network ports on Windows®, Red Hat ®, and NetApp® systems
  • Identify the worldwide node name (WWNN) on Windows, Red Hat, and NetApp systems
  • Set up and verify multiple path iSCSI connectivity between Windows, Red Hat, and NetApp systems

Module 15 LUN Access

  • Describe the steps to allow a Windows® Server 2008 R2 initiator to access a LUN on a storage system
  • Describe the steps to allow a Red Hat® initiator to access a LUN on a storage system

Module 16 Availability Overview

  • List the methods to back up and recover data for data availability
  • Describe the methods to ensure system availability

Module 17 Snapshot Copies

  • Describe the function of Snapshot™ copies
  • Explain the benefits of Snapshot copies
  • Identify and execute Snapshot commands
  • Create and delete Snapshot copies
  • Configure and modify Snapshot options
  • Explain the importance of the .snapshot directory
  • Describe how disk space is allocated by a Snapshot copy for volumes and aggregates
  • Schedule Snapshot copies
  • Configure and manage the Snapshot reserve

Module 18 SnapRestore

  • Explain how SnapRestore® technology works with Snapshot™ copies
  • Describe what SnapRestore reverts
  • Revert a volume or a file using SnapRestore
  • Explain how SnapRestore works with SnapMirror®
  • Describe the effects of SnapRestore on backup operations

Module 19 SnapVault

  • Describe SnapVault® components and benefits
  • Configure SnapVault on primary and secondary systems
  • Administer SnapVault on primary and secondary systems
  • Describe the application-consistent backup feature available in Data ONTAP® 8.0 7-Mode
  • Restore data from secondary to primary systems

Module 20 OSSV

  • Describe how Open Systems SnapVault® integrates with Data ONTAP® SnapVault
  • List Open Systems SnapVault advanced features
  • Configure and administer Open Systems SnapVault
  • Perform Open Systems SnapVault backup and restore operations
  • Troubleshoot and resolve Open Systems SnapVault transfer failures

Module 21 High-Availability

  • Define the high-availability controller configuration
  • Describe the three modes of high-availability operation with a high-availability pair
  • Analyze the effect on client protocols during failover and giveback operations

Module 22 MetroCluster

  • Describe a stretch MetroCluster environment
  • List the basic steps to implement a stretch MetroCluster
  • Describe a fabric-attached MetroCluster environment
  • List the basic steps to implement a fabric-attached MetroCluster

Module 23 SnapMirror

  • Explain the SnapMirror® Async, Sync, and Semi-Sync modes of operation
  • Describe how volume SnapMirror and qtree SnapMirror replicate data
  • Configure SnapMirror
  • Perform advanced SnapMirror operation
  • Explain SnapMirror performance impact

Module 24 Performance

  • Use Data ONTAP® tools to identify networking, disk I/O, FC loop saturation, and CPU bottlenecks using systat, stats, and perfstat
  • Discuss how increasing utilization can affect performance
  • Use the reallocate command to maintain performance
  • Use recommended techniques to optimize Data ONTAP configuration for SAN and NAS

Accelerated NCDA BootCamp Lab Exercises

Lab 1-1 Identify the exercise environment

Lab 1-2 Log into the exercise environment

Lab 1-3 Install NetApp System Manager

Lab 2-1 Identify the exercise environment (NFS Overview)

Lab 2-2 Log into your assigned storage system

Lab 2-3 Log in to NetApp System Manager and add your storage system

Lab 3-1 License and configure the NFS service

Lab 3-2 Add an admin host by the way of the SETUP command

Lab 4-1Mount the root volume of the storage system on an admin host

Lab 4-2 Export a volume using the command line interface

Lab 4-3 Rename a volume and verify the automatic export

Lab 4-4 Export and mount a Qtree

Lab 4-5 Export to a subnet

Lab 4-6 Export to a netgroup

Lab 4-7 Export a Qtree using NetApp System Manager

Lab 4-8 Mount an export from an admin host

Lab 5-1 Identify the exercise environment (CIFS Overview)

Lab 6-1 Configure a storage system for a Windows Workgroup environment

Lab 6-2 Review the results of CIFS setup in a Windows Workgroup environment

Lab 7-1 View current shares

Lab 7-2 Create a new share using the command line interface

Lab 7-3 Verify share access and display session information

Lab 8-1 Add a new local user account and configure user access

Lab 8-2 Access a network drive and work with access control

Lab 8-3 Create a local group

Lab 9-1Terminate CIFS services using NetApp System Manager

Lab 9-2 Configure DNS with NetApp System Manager

Lab 9-3 Configure the time services with NetApp System Manager

Lab 9-4 Reconfigure the CIFS services using NetApp System Manager

Lab 9-5 Create a 32-bit aggregate using NetApp System Manager

Lab 9-6 Create a volume using NetApp System Manager

Lab 9-7 Create shares and manage the permissions of the shares

Lab 9-8 Create a domain user

Lab 9-9 Create a share with Computer Management

Lab 9-10 Map shares to drive letters

Lab 9-11 Display CIFS sessions

Lab 10-1 Configure your storage system for multiprotocol access

Lab 11-1 No exercise

Lab 12-1 Identify the components of your SAN environment

Lab 13-1 No exercise

Lab 14-1 Configure iSCSI on a storage system

Lab 14-2 Configure Windows for Multipath I/O

Lab 14-3 Install NetApp DSM on Windows

Lab 14-4 Install the Host Utilities Kit on Windows (HUK)

Lab 14-5 Configure iSCSI on Windows

Lab 14-6 Confirm iSCSI session on a storage system

Lab 14-7 Confirm the second iSCSI session on Windows

Lab 14-8 Confirm the second iSCSI session on a storage system

Lab 14-9 Install the Host Utilities Kit on Linux (HUK)

Lab 14-10 Install the iSCSI software initiator for Linux

Lab 14-11 Configure iSCSI software initiator on Linux

Lab 14-12 Confirm iSCSI sessions on a storage system

Lab 15-1 Create a LUN with separate commands

Lab 15-2 Initialize a LUN with Disk Management

Lab 15-3 Provision a LUN with Disk Management

Lab 15-4 Persist the mounting of a LUN

Lab 15-5 Create iSCSI-attached LUNs for Red Hat Linux

Lab 15-6 Discover iSCSI-accessible LUNS from Red Hat Linux

Lab 15-7 Prepare an individual LUN and mount it on Red Hat Linux

Lab 16-1 Identify the exercise environment (Availability Overview)

Lab 17-1 Create a Snapshot Copy using NetApp System Manager

Lab 17-2 Restoring a Windows file from a Snapshot copy

Lab 17-3 Restoring a Unix file from a Snapshot copy

Lab 17-4 Manage Snapshot copies using NetApp System Manager

Lab 17-5 Create a FlexClone using the command line interface

Lab 18-1 License and configure SnapRestore

Lab 18-2 Perform a volume SnapRestore

Lab 18-3 Perform a file SnapRestore

Lab 19-1 Identify primary and secondary systems

Lab 19-2 Configure SnapVault on the primary system

Lab 19-3 Configure SnapVault on the secondary system

Lab 19-4 Initialize the transfer

Lab 19-5 Perform a restore

Lab 19-6 Restart the backup relationship

Lab 20-1 Install Open Systems SnapVault for Windows Server

Lab 20-2 Configure the SnapVault secondary system

Lab 20-3 Configure Windows server 2008 R2’s firewall for Open System SnapVault

Lab 20-4 Establish the Open Systems SnapVault baseline

Lab 20-5 Perform a restore and resume SnapVault operations

Lab 21-1 License and configure controller failover

Lab 21-2 Perform a controller failover

Lab 21-3 Perform a controller giveback

Lab 22-1 No exercise

Lab 23-1 Identify the source and destination systems

Lab 23-2 Set up SnapMirror on the source storage system

Lab 23-3 Set up SnapMirror on the destination storage system

Lab 23-4 Initiate a baseline transfer and schedule updates

Lab 23-5 Break the SnapMirror relationship

Lab 23-6 Resynchronizing the relationship

Lab 23-7 Reinstate the original SnapMirror relationship

Lab 23-8 Configure Synchronous SnapMirror

Lab 24-1 No exercise