Network Convergence System 4000 Series Integrated Services Router (NCS4000HW)


Course Overview

The Network Convergence System 4000 Series Integrated Services Router (NCS4000HW) course is an instructor-led, lab-based, hands-on course offered by Learning@Cisco. The overall goal of the course is for you to be able to operate the NCS 4000 platform using the Cisco® Transport Controller Graphical User Interface (GUI), as well as the Cisco IOS® XR Software Command-Line Interface (CLI).

This course covers how to use the Cisco Transport Controller and Cisco IOS XR Software version 6.1.22 to create Cisco MPLS-TE network topologies. ITU-T G.709 Optical Transport Network (OTN) circuits will be created and edited on the fly with path protection and revertive options. It will also cover how to manage NCS 4000 Network Elements (NEs), provision services, install software and packages, manage configuration files, back up the system, and provide an overview of the system hardware. Cards used in this course include the 2x 100G CPAK 10x 10G SFP+ OTN/Packet, 2x 100G CP-DQPSK WDM Full C band Tunable, 4009 Agnostic Cross Connect single-chassis, External Connection Unit, and two Route Processor and Controller 32-GB RAM line cards.

Who should attend

This course is designed for technical professionals who need to know how to deploy and operate OTN circuits over a Dense Wavelength Division Multiplexing (DWDM) network.

The primary audience for this course includes:

  • System administrators
  • Network administrators
  • Technical support personnel who are involved with the deployment, operation, and maintenance of Cisco NCS 4000 Series systems
  • Channel partners and resellers


Course Objectives

  • Upon completion of this course, you should be able to:
  • Describe the NCS 4000 Series functionality in the OTN
  • Recognize where the NCS 4000 Series can be used in the OTN
  • Identify the two NCS 4000 Series chassis
  • Describe the NCS 4000 Series system hardware
  • Apply the appropriate fabric card for the backplane
  • Distinguish between the common cards and line cards used in both chassis
  • Configure the NCS 4000 Series node using Cisco IOS XR
  • Demonstrate the operation of the NCS 4000 Series platform using the Cisco Transport Controller GUI
  • Demonstrate the operation of the NCS 4000 Series platform using the Cisco IOS XR CLI
  • Underline the OTN standard hierarchy
  • Discuss the OTN frame structure for Optical Transport Unit (OTUk), Optical Channel Data Unit (ODUk), and Optical Channel Payload Unit (OPUk)
  • Explain how OTN circuits are protected and restored
  • Cite the necessary requirements for creating OTN circuits
  • Provision circuits for OTN using Cisco Transport Controller
  • Provision circuits for OTN using Cisco IOS XR
  • Manage the installation of software and packages
  • Back up the system database
  • Provide general troubleshooting on the NCS 4000 Series

Course Content

Module 1: Cisco NCS 4000 Series Overview
  • NCS 4000 Series in the OTN Environment
  • Interpreting the Use Cases for the NCS 4000
Module 2: Cisco NCS 4000 Hardware Introduction
  • Comparing the NCS 4000 Chassis Architecture
  • Examining the Common Equipment on the NCS 4000 Series
  • Categorizing the NCS 4000 Line Cards
Module 3 Cisco IOS XR Configuration Basics
  • Configuring Cisco IOS XR Operations
  • Cisco IOS XR NCS 4000 Minimal Configuration
  • Reviewing the Configuration
Module 4 NCS 4000 System Setup
  • Establishing a Connection to a Node
  • Installing and Logging In to Cisco Transport Controller
  • Creating User Profiles and Assigning Privileges
  • Provisioning the Node for Network Connectivity
  • Performing Preliminary Checks
Module 5 OTN Service Capabilities
  • ITU-T OTN Definition
  • OTN Hierarchy
  • Protection and Restoration
Module 6 Cisco NCS 4000 OTN Circuits
  • Explaining OTN Circuit Parameters
  • Configuring Circuits with Cisco Transport Controller
  • Configuring Circuits with Cisco IOS XR Software
Module 7 Maintenance on the NCS 4000 System
  • NCS 4000 Node Maintenance Tab
  • Configuring Bridge and Roll with Cisco Transport Controller
  • Capturing NCS 4000 Logs
  • Viewing and Provisioning Performance Monitor Parameters
Module 8 Cisco NCS 4000 Management and Troubleshooting
  • Performing a System Upgrade and Installing Feature Packages
  • Performing Disaster Recovery
  • Smart License Overview
  • Troubleshooting NCS 4000 Line Cards
  • OTN Alarms

Цены & Delivery methods

Classroom training

3 дня

  • Россия: 297 500,– руб.

Даты и регистрация

В настоящее время расписание на курс отсутствует